Cut out the cardboard pieces for your yurt house based on the diagram. The scale is in inches.
Mark the holes
Measure and mark out the distances on the wall pieces of the yurt. These points mark the connections of the wall structure.
Plan your circuit
Connect the magnetic switch to the negative side of the batteryboard. Then connect the positive batteryboard to the heart LEDboard. Complete the circuit by connecting the negative side of the LEDboard to the magnetic switch.
Build your wall
Use paper fasteners to pin together your wall pieces into a grid pattern. Adding connections will make your wall structure expandable.
Connect your door piece to the base and add the wall structure. You can use tape, pins or paper fasteners secure everything.
Enjoy your project
Test out your circuit!
Temperature sensor activates the circuit when you blow warm air on it!