snap-on patches that light up when activated by a touch.
duration 40 minutes
magic happens when you touch the light sensor.
the teknikio light sensorboard is the easiest way to activate your projects with light level.
use snaps that are conductive
let's make this
you will need
Star LED Board
Heart LED Board
Ghost LED Board
Diamond LED Board
Light Sensor Board
White Fanny Pack
Conductive threads and Regular threads
design your own LED patches! pick any color felt you want. place the board in the middle. trace the outline 1/8 inch away from the board and cut out the shape.
center the board on the shape and turn to the back. take two tops of the snaps and place one at the bottom (the negative) and one on R, G, or B, depends on which color you want.
connect the board and the snaps by sewing them together with conductive threads. to have a better connection, make sure you sew 3 times per hole.
build the circuit! use alligator clips to make a draft of the circuit. it will help you understand how the project works.
refer to Step #4. place the battery board inside the pack; sensor board and the bottoms of the snaps on the outside.
build the circuit by sewing with conductive threads.
note that the battery should not be in the battery board during the building process.